The molding molds of the RDF molding machine are closely sakārtots in a ring layout, and a materiāls formēšana kanāls is formē starp divi blakus veidnes. In this way, the whole machine forms a radially distributiond material forming channel. The forming pressure wheel makes planetary motion driven by the main power% 2c braukšana materiāls materiāls to būt barots iekšā the mold inieplūde. As the spiediens ritenis pakāpeniski tuvojas punkts punkts griešana iegriezums iekšā pelējums, the fed materiāls ir saspiests iekšā the mold channel under normal spiediens of the spiediens ritenis, and turpinās to stack in kanālā to form spiediens, and finally exits the mold in form of the finished product, completing the whole molding process.
|
Modelis |
Jauda |
Jaudas |
Brikete izmērs |
Caurums daudzums |
|
MK-550 |
55kw |
1t/h-1.5t/h |
32 * 32 mm |
36gab |
|
MK-750 |
75kw |
1.5t/h-2t/h |
32 * 32 mm |
54 gab |
|
MK-900 |
90kw |
2t/h-2.5t/h |
32 * 32 mm |
72 gab |
|
MK-1600 |
160kw |
2.5t/h-3t/h |
32 * 32 mm |
120 gab |
Produkts priekšrocības:
1. The mold has a large number of apertures and a large processing capacity; the structure is simple, the maintenance is simple and convenient, and the maintenance frequency is low.
2. Dynamic heating molding, the molding effect is good; spiediens molding, the finished product will not loosen its shape.
3. The radial gap between the pressure roller and the mold is easy to adjust to ensure the appropriate gap between the pressure roller and the mold.
4. Materiāls ir stiprs pielāgošanās spēja un var būt apstrādāts no pulveris līdz 50mm garums.